tutawei.blogg.se

Support for these commands will cease in a future release.

Note Commands in this chapter that have been replaced by new commands continue to perform their normal functions in the current release but are not longer documented. Configuration files contain commands entered to customize the functions of the access server.įor access server configuration information and examples, refer to the "Loading System Images and Configuration Files" chapter in the Access and Communication Servers Configuration Guide. System images contain the system software. This chapter provides detailed descriptions of the commands used to load and copy system images and configuration files. Secondary Image : 3257994 10/09/17 N.11.System Image and Configuration File Load Commands ProCurve Switch 2810-24G# copy flash flash primary ProCurve Switch 2810-24G# sh flash ProCurve Switch 2810-24G# sh verĮxecute the copy command as follows to copy the flash from secondary to primary. If everything is working fine with secondary image Upgrade the primary imageĪnd set switch with boot primary image. ProCurve Switch 2810-24G# boot system flash secondaryĭevice will be rebooted, do you want to continue ?Y

Once the FLASH is updated to the latest version, issue the below command to Reboot the system to the secondary image. You could also check the flash image versions by running the command, “Show flash”ĭownload the latest firmware version and put the file in the TFTP root folder. Upgrading the HP Procurve firmware is straight forward when using the CLI and TFTP server. Before going to upgrade check what version of the software is currently running, issue the “show version” command.